Furuno NAVNET TZ2 TZTL12F - How to Show or Hide the Depth and Frequency Indications; Availability of Points and Event Marks Registration, and Go to a Point

8. MULTI BEAM SONAR DFF-3D
8-19
8.6.11 How to show or hide the depth and frequency indications
You can show or hide the depth and TX frequency at the bottom left corner of the
screen.
1. Open the Layers menu.
2. Select [ON] or [OFF] for [Depth Information].
8.6.12 Availability of points and event marks registration, and go to a
point
For how to register points and event marks, see section 4.2.
The table below shows function availability according to latitude/longitude, heading
data presence or absence. If there is no latitude/longitude data, none of the functions
below are available.
Latitude/Longitude / Heading data: YES
Latitude/Longitude: YES, Heading data: NO
Item Fish Seabed
Other than Fish
or Seabed
Point registration Yes Yes No
Go to point Yes Yes No
Event mark registration No No Yes
Item Fish Seabed
Other than Fish
or Seabed
Point registration No No No
Go to point No No No
Event mark registration No No Yes