2. CHART PLOTTER
2-32
2.16 Photos
Screen-captured images and photos taken with the smartphone/tablet application TZ
First Mate
™
can be shown on the chart plotter display. See section 2.14.
Note: Before opening the application, connect your smartphone/tablet with your wire-
less LAN network (see section 1.19).
How to import photos
See section 9.3 for how to import photos. Imported photos appear on your plotter
screen with the photo icon ( ).
You can check how many photos are stored on your NavNet TZTouch2. Go to the
home screen, then select [Settings]→[General], then scroll the menu to show the [Da-
ta Usage] section.
At the [Photos] line, “currently saved photos” / “total available photo storage” indicates
the total number of photos versus the total available space for photos. In the following
example, a total of five photos are stored.
How to move a photo on-screen
1. Tap the photo you want to move, then select “Move” from the displayed
pop-up menu. The move icon appears at the selected photo location,
similar to the figure shown to the right.
2. Drag and drop the icon to the new location, or tap the new location on-
screen.
3. Tap [End Move] at the top-right corner of the screen.
To Next Page
Loading...
