Furuno NAVNET TZ2 TZTL12F - Video Signal Type

10. CAMERA/VIDEO/EXTERNAL EQUIPMENT
10-2
10.2 Video Signal Type
There are five types of video signals which can be connected to this equipment.
• Digital signal (HDMI)*: Images from surveillance cameras, on-board cameras and
video playback.
Note: This feature is only available with TZT2BB.
• Analog signal*: Images from surveillance cameras, on-board cameras and video
playback.
• Digital signal (IP)*: Images from a network camera.
Note: Turn on the network camera first, then turn on the MFD.
• Digital signal (sonar): Video output signal from the sonar CSH-8L.
Note: Requires HDMI converter cable and converter.
• Axis Quad Server: The image from an Axis Quad Server, which can feed up to four
lines of video signals simultaneously.
• FLIR: Images from a FLIR brand infrared camera
* These signals can be output and shared with all NavNet TZT2BB or TZtouch2 units
connected in the network, by connecting a video encoder.
Compatible FLIR cameras
The following FLIR cameras are compatible with this equipment, as of 12/2020.
M132, M232, M300C, M332, M364, M364C, M364CLR, M500
Note: The ClearCruise
™
function of FLIR cameras is inoperative with the NavNet
TZtouch2.
Camera display combinations
The images from a maximum of two cameras can be displayed simultaneously.
Note: The images from two analog cameras cannot be displayed simultaneously.
See the table below for the combination of cameras that can show their images simul-
taneously.
Analog
1
Analog
2
IP
Cam.
1
IP
Cam.
2
IP
Cam.
3
IP
Cam.
4
Axis
Quad
Serv.
2nd
Axis
Quad
Serv.
HDMI
Input
Analog 1 No No Yes Yes Yes Yes Yes Yes Yes
Analog 2 No No Yes Yes Yes Yes Yes Yes Yes
IP Cam. 1 Yes Yes Yes Yes Yes Yes Yes Yes Yes
IP Cam. 2 Yes Yes Yes Yes Yes Yes Yes Yes Yes
IP Cam. 3 Yes Yes Yes Yes Yes Yes Yes Yes Yes
IP Cam. 4 Yes Yes Yes Yes Yes Yes Yes Yes Yes
Axis Quad
Serv.
Yes Yes Yes Yes Yes Yes Yes Yes Yes
2nd Axis
Quad Serv.
Yes Yes Yes Yes Yes Yes Yes Yes Yes
HDMI
Input
Yes Yes Yes Yes Yes Yes Yes Yes No