Furuno NAVNET TZ2 TZTL12F - How to Display, Arrange a PBG Recording; How to Delete PBG Recordings

8. MULTI BEAM SONAR DFF-3D
8-21
8.7.3 How to display, arrange a PBG recording
Show the chart plotter display, then open the Layers menu. Set [Depth Shading] to
[DFF-3D]. [Depth Shading] is automatically selected to [DFF-3D] whenever PBG re-
cording is started.
Depth shading colors
Six depth shading colors are available. For details, see section 3.2.1.
Depth contours
In the default setting, depth contours are automatically overlaid on a PBG recording
when the recording is displayed. To hide the contours, open the Layers menu, then
turn [Depth Contours] on or off as required.
To show the contour lines in monochrome, see "How to set color shading" on page 8-
16.
PBG terrain shading
You can apply shading the PBG terrain to emphasize the terrain.
1. Home screen→[Settings]→[Chart Plotter].
2. At [PBG Terrain], select the degree of terrain shading, among [Light], [Medium]
and [Strong]. For no shading, select [Off].
3. Tap the close button on the title bar to finish and close the menu.
8.7.4 How to delete PBG recordings
A PBG recording cannot be deleted while recording.
How to delete a part of a PBG recording
1. On the chart plotter display, tap anywhere on the PBG re-
cording to show the pop-up menu.
2. Tap [Delete PBG Area]. An icon appears where you tapped
the screen.
3. Drag the icon to the start point of the area to delete.
Option Description
[OFF] Turn off [Depth Shading], PBG recording.
[3D Chart] [Depth Shading] using chart data.
[HR 3D Chart] No use.
[DFF-3D] [Depth Shading] using PBG recording.
Delete PBG Area
Chart Info