2. CHART PLOTTER
2-17
[Sound Alarm Until Acknowledged]: Turn this item on to sound the aural alarm until
an alarm is acknowledged (see subsection 2.10.9).
[Save Log File]: Save alert list to microSD card.
[Reset Default Settings]: Select this menu item to restore default settings for the
[Alarm] menu.
2.10.9 Alarms list
When an alarm is violated, you can see the name of the offending alarm on the
[Alarms] list. The list stores both warning and system messages. Open the home
screen, then tap [Lists] followed by [Alarms]. Active alarms are flashing and have a red
vertical bar at the let margin. Tap an active alarm to acknowledge it and stop the flash-
ing. After the cause of an alarm is removed, the alarm message is moved to [HISTOR-
IC] section. Tap the close button to close the list.
2.11 Track
The track (or movement) of your ship is plotted on the screen with position data fed
from the internal GPS navigator. Your track lets you see how your ship has moved
over time.
The track is saved to the internal memory if track recording is activated. A line runs
between each track point. The internal memory stores a maximum of 30,000 track
points.
Track is saved when the power is turned off. Unnecessary track can be deleted. Track
can also be used to create a route.
Depth Alarm
Color on
Status bar
Message
Date, time alarm generated
Track
To Next Page
Loading...
