15. OTHER FUNCTIONS
15-4
15.2 Units Menu
The [Units] menu sets the unit of measurement for speed, distance, depth, etc. Open
the home screen, then tap [Settings]→[Units] to display the [Units] menu.
Menu item Options
[Bearing Display] The mode (magnetic or true) of all heading and bearing data.
[Magnetic], [True]
[True Wind Calculation
Reference]
Select wind value to display from speed over ground or speed through
water (surface).
[Ground], [Surface]
[Position Format] Select position format.
[DDD°MM.mmmm’], [DDD°MM.mmm’], [DDD°MM.mm’],
[DDD°MM’SS.ss’’], [DDD.dddddd°], [Loran-C], [MGRS].
[Loran C Station &GRI] Enter Loran C Station and GRI. Available when [Position Format] is se-
lected to [Loran-C].
[Short/Long Change Over] Set the distance at which to switch between short and long range (set-
ting range: 0.0 to 2.0 NM). If the setting is 0.5, for example, short range
is automatically selected when the long range unit is 0.4 or less. The
setting "0.0" fixes the unit to long range.
[Range (Long)] Select the unit for the long range.
[Nautical Mile], [Kilometer], [Mile]
[Range (Short)] Select the unit for the short range.
[Foot], [Meter], [Yard]
[Depth] Select the unit for the depth.
[Foot], [Meter], [Fathom], [Passi Braza]
[Height/Length] Select the unit for the height and length.
[Foot], [Meter]
[Fish Size] Select the unit for the fish size.
[Inch], [Centimeter]
[Fish Weight] Select the unit for the fish weight.
[Pound], [Kilogram]
[Temperature] Select the unit for the temperature.
[Fahrenheit Degree], [Celsius Degree]
To Next Page
Loading...
