8. MULTI BEAM SONAR DFF-3D
8-10
8.5 Cross Section Display Operations
This section covers the functions available with the cross section display. For the
menu items shared with the conventional fish finder, see chapter 7. To show the menu
for this function, tap the screen to show the pop up menu; or from the [Home] screen,
tap [Settings]→[Multi-Beam Sonar].
Layers menu for cross section
8.5.1 How to switch between TX and STBY
Open the Layers menu and then select [ON] for [TX/STBY] to start transmitting, [OFF]
to stop transmitting. "Stand-by" appears at the center of the screen when transmission
is stopped.
8.5.2 How to show or hide the grid
The grid, which is useful for measuring the distance to a target, can be shown or hid-
den as follows.
1. Open the Layers menu.
2. Select [ON] or [OFF] for [Grid].
To Next Page
Loading...
