4. POINTS, BOUNDARIES
4-16
3. Tap the icon. In the example list below the points are sorted by name.
4. Put a checkmark () in the checkbox of the point to edit, or check a sort title to
edit all points within that title. For example, in the [Points] list above, check “F” to
edit all points whose name begins with “F”.
5. On the title bar, tap [Edit Checked Items].
6. To edit the name, comment, color, or icon, tap the item to edit and refer to the pro-
cedure in section 4.10.1.
7. Tap [Save & Close] to save changes and close the list.
Like with points, you can edit log catches, from the [Catches] list.
4.11 How to Move a Point to the Screen Center
You can easily place a point at the center of the chart plotter display from the [Points]
list.
1. Open the home screen, then tap [Lists].
2. Tap [Points] to open the [Points] list.
3. Tap [Name], [Icon], [Color] or [Range] at the top of the list to sort the list.
4. Tap the point to find then tap [Find On Chart].
The menu closes and the selected point is put at the center of the screen on the chart
plotter display.
Note: If a split screen is in use when this procedure is initiated, the split screen is re-
placed with the full screen chart plotter display, then the point is put at the center of
the full screen display.
To Next Page
Loading...
