12. INSTRUMENT-RELATED DISPLAYS
12-26
12.7 Yamaha Engine Status Display
Overview
When interfaced with a Yamaha outboard engine(s) compatible with Command Link
®
,
Command Link Plus
®
, and Helm Master or Helm Master EX, the NavNet TZtouch2
can display engine information on the full-screen or quarter screen. All setups and in-
dications of Yamaha engine gauges that are available with the dedicated Yamaha dis-
plays can be shown on the NavNet TZtouch2.
There are two types of displays, the engine combo display, and the boat status dis-
play.
The engine combo display shows critical engine system data, including shift posi-
tion, engine RPM, boat speed, engine trim level, available fuel in gallons, fuel level (up
to six tanks), fuel flow, fuel economy and other vital engine functions such as oil pres-
sure, water pressure and battery voltage.
The boat status display shows provides important information such as trip distance,
speed, fuel flow, fuel economy, gallons used, rudder info, depth, and other informa-
tion.
Yamaha engine information can also be shown on the conventional instrument dis-
play, using the NMEA 2000 PGN sentences 127488 (Engine Parameters, Rapid Up-
date) and 127489 (Engine Parameters, Dynamic).
Set the number of engines and other engine-related information on the [YAMAHA EN-
GINE SETUP] menu, in the [Initial Setup] menu. For details, see the NavNet TZtouch2
installation manual.
Main differences between Master Helm and Master Helm EX
Helm Master Helm Master EX
No. of engines Multiple (four max.) Single
Steering system Electronic+hydraulic Electronic+electric
Shift throttle Electronic Electronic
Joystick Standard Option
Fish point, Drift Yes Yes
Stay point Yes No
Autopilot No Yes
To Next Page
Loading...
