Furuno NAVNET TZ2 TZTL12F - How to Change the Navpilot Settings

2. CHART PLOTTER
2-30
SABIKI mode (NAVpilot-300 only)
1. Tap the Turn/Menu button ( ) in the NAVpilot data box to show the NAVpilot
menu.
2. Tap [SABIKI Mode].
3. Use the set course buttons (see page 2-29) to change your course.
Turn mode, Fishing mode (NAVpilot-300 only)
1. Tap the Turn/Menu button ( ) in the NAVpilot data box to show the NAVpilot
menu.
2. Tap desired turn type. See the Operator’s Manual for the NAVpilot-300 for details.
2.13.4 How to change the NAVpilot settings
1. Tap the [Turn/menu button] to show the NAVpilot menu.
2. Tap [NAVpilot Settings] to show the NAVpilot settings menu.
3. Change the settings as required. For details, see the NAVpilot operator’s manual.
HDG
Mode