Furuno NAVNET TZ2 TZTL12F - How to Adjust the Brilliance of the Display and Power Switch and Hue

1. SYSTEM INTRODUCTION
1-13
1.4 How to Adjust the Brilliance of the Display and
Power Switch and Hue
With the power applied, press to show the [Power & Brilliance] window.
TZTL12F/15F: Tap the power switch, tap the slider bar, or drag the slider icon (circle)
to adjust the brilliance of both the display and the power indicator.
TZT2BB: Tap the power switch, tap the slider bar, or drag the slider icon (circle) to
adjust the brilliance of both the power lamp and the power key back-light.
The [Day], [Dusk], [Night] and [Auto] options (below the slider bar) set the hue accord-
ing to selection. The [Auto] option automatically sets the hue according to time of day.
How to synchronize brilliance of units in the network
Tap [Settings]→[General], then turn on [Brilliance Synchronization] to synchronize the
brilliance among NavNet units in the network.
TZTL12F/15F:
Adjust the display brilliance.
TZT2BB:
Adjust the power lamp and power
key backlight brilliance.
Hue options from left:
Daytime, Dusk, Nighttime, Automatic
DRS6A_X-CLASS
BBDS1
Touch Screen
Device Network
Closes the window.