Furuno NAVNET TZ2 TZTL12F - Own Ship Icon Orientation

2. CHART PLOTTER
2-5
2. Tap [Distance] or [Time] as required, then tap the [<] icon at the title bar.
If you selected [Distance], go to step 3. For [Time], go to step 5.
3. Tap [COG Vector Length] to display the software keyboard.
4. Set the length for the COG vector, then tap []. Go to step 6.
5. Tap [COG Vector Time], then tap the time for the COG vector.
6. Tap the close button on the title bar to finish.
2.5.4 Own ship icon orientation
You can select the orientation of the boat icon to heading or COG.
1. Open the home screen, then tap [Settings]→[Ship & Track].
2. Tap [Vessel Icon Orientation].
3. Tap [Heading] or [COG].
4. Tap the close button on the title bar to finish.