15. OTHER FUNCTIONS
15-10
15.4 Facsimile Receiver FAX-30
The FURUNO Facsimile Receiver FAX-30 installs in the NavNet TZtouch2 network
and can be controlled from a NavNet TZtouch2 display. Below are the steps to start
fax operation.
1. Connect the FAX-30 to the NavNet TZtouch2 network.
2. Open the home screen, then tap "Fax30" (left side of screen).
[Synchronization Log] Displays the network synchronization log.
[Quick Self Test] Test the equipment.
[Certification Mark] Show the certification marks this equipment has received.
[Service] Requires login password. For the service technician only.
[Event Input
Configuration]
These menu items are not used.
[Update Network
Equipments]
Updates all NavNet equipment in the network. For the service technician.
[Remote Controller
Configuration]
When there are multiple units in the NavNet network, the Remote Controller
MCU-004/MCU-005 can select the display to show on the unit with Remote
Controller connection. Further, the cycling order of displays can be set. See
section 1.2.2 (MCU-004) and section 1.2.3 (MCU-005).
[Adjust Display Reso-
lution]
Adjust the output resolution from the TZT2BB to match the connected mon-
itor’s resolution.
Note: This menu item does not appear for TZTL12F/TZTL15F systems.
[Update Network
Equipments]
Updates the network equipment. For the service technician.
[Sirius Radio Diag-
nostic]
Check the satellite radio of the FURUNO BBWX weather receiver for proper
operation. See section 13.7.3.
[Sirius Weather Diag-
nostic]
Check the weather section of the FURUNO BBWX weather receiver for
proper operation. See section 13.6.
[Reset Default Set-
tings]
Reset the system to default settings.
Menu item Description Option (setting range)
FAX-30 Browser
To Next Page
Loading...
