Furuno NAVNET TZ2 TZTL12F - How to Show the ACCU-FISH Icon on the Overlay

3. 3D DISPLAY, OVERLAYS
3-12
3.2.6 How to show the ACCU-FISH icon on the overlay
The ACCU-FISH icon can be shown on the chart plotter display. Requires an ACCU-
FISH
™
compatible transducer (see Appendix 2) and applicable network sounder (DFF
series, BBDS1).
To show the ACCU-FISH icon on the chart plotter display, open the Layers menu, then
set [ACCU-FISH] to [ON]. Select [OFF] to remove the icon from the chart plotter dis-
play.
Note: Control of the ACCU-FISH icon on the chart plotter display can always be done
through the Layers menu, regardless of the [ACCU-FISH] setting (see section 7.14.3)
on the [Fish Finder] menu.
ACCU-FISH icons