15. OTHER FUNCTIONS
15-11
3. Tap [WX FAX] or [NAVTEX].
4. Refer to the Operator’s Manual of the FAX-30 for operation information.
The FAX-30 display can only be accessed by one NavNet TZtouch2 unit at a time.
When another NavNet TZtouch2 display accesses the FAX-30, control of the FAX-30
is given to that display after the picture has stopped completely. This sequence takes
approximately one minute.
15.5 How to Check for Software Updates
You can check for software updates via the internet.
1. Referring to section 1.19, connect to the internet.
2. Open the home screen, then tap [Settings]→[General]→[Check for Software Up-
date]. The following window appears.
After the checking is completed, one of the following messages appear:
• When your unit has the latest software: "THE LATEST SOFTWARE IS IN-
STALLED ON THIS DEVICE."
• When newer software is available: "A SOFTWARE UPDATE IS AVAILABLE.
PLEASE VISIT NAVNET.COM TO DOWNLOAD IT."
3. Tap the [OK] button.
4. Tap the close button on the title bar to finish.
FAX-30 Browser
i
Software Update
Checking new version availability...
To Next Page
Loading...
