Furuno NAVNET TZ2 TZTL12F - Operating External Equipment

10. CAMERA/VIDEO/EXTERNAL EQUIPMENT
10-9
10.5 Operating External Equipment
You can control external equipment (such as on-board monitoring and digital switch-
ing) by connecting the external equipment via the HDMI Input ports, and the touch
monitors via the USB ports on the TZT2BB.
Note: This feature is not available for the TZTL12F/TZTL15F.
Configuration example
How to set up operation of external equipment
1. Open the [Camera] menu.
2. Set [HDMI Input] and [Touch Output] to [ON].
How to show the external equipment’s display
From the Home screen, tap the Camera icon to show the external equipment’s display
appears.
Touch monitor TZT2BB
*: External equipment must be touch-operation capable.
USB
HDMI
USB
HDMI
External
equipment*
External equiment’s
User Interface
External equiment’s
User Interface