6. RADAR
6-5
6.6 Range Scale
The range setting controls the size of the area (in nautical miles, kilometers or statute
miles) that appears on your screen. The range appears at the bottom right-hand cor-
ner of the screen.
How to zoom in or out the range scale
The range scale can be selected two ways, as shown below. The slider bar can be
shown or hidden with [Show Scale Slider] in the [Settings]→[Radar] menu.
6.7 Orientation Mode
The orientation mode determines how you view the
positional relationship between your ship and other
targets and the state of movement. There are two ori-
entation modes, head up and north up.
Head-up: A display without azimuth stabilization in
which the line that connects the center with the top of
the screen indicates your heading. Targets are shown
at their measured distances and in their directions rel-
ative to your heading.
North-up: Targets are shown at their measured dis-
tances and their true (compass) directions from your
ship. North is at the top of the screen. The heading line
changes its direction according to your heading.
Zoom in Zoom out
Method 1: Pinch screen
Method 2: Drag slider knob
(or tap bar or “+”, “-” symbols)
Zoom inZoom in
Zoom outZoom out
To Next Page
Loading...
