8. MULTI BEAM SONAR DFF-3D
8-18
[Color Mode] selected to [Fish]
Menu item Description Setting options
[Seabed Monochrome Col-
or]
For setting single tone. [Gray Hue], [Brown
Hue]
[Fish Color] For setting multi tone or single tone. [Classic Hue], [Invert-
ed Classic Hue], [Red
Hue], [Blue Hue],
[Green Hue], [Yellow
Hue]
[Auto Fish Shading] Use automatic or manual fish shading.
Note: Objects that are detected outside of
the selected color range are shown on-
screen in white color.
[ON], [OFF]
[Minimum Value] Use the software keyboard to set the shal-
lowest depth to use. [Auto Fish Shading]
must be OFF to enter depth.
Alternatively, tap the minimum value indica-
tion on the color bar scale to show the slider
bar. Drag the slider bar to set.
0 to 1200 (m)
[Maximum Value] Use the software keyboard to set the deepest
depth to use. [Auto Fish Shading] must be
OFF to enter depth.
Alternatively, tap the maximum value indica-
tion on the color bar scale to show the slider
bar. Drag the slider bar to set.
0 to 1200 (m)
Manual mode Auto mode
Tap [A] to switch between automatic
and manual depth/color shading
scale setting mode.
[Minimum value]
Shallowest depth
[Maximum value]
Deepest depth
To Next Page
Loading...
