Furuno NAVNET TZ2 TZTL12F - Page 384

APPX. 1 MENU TREE
AP-3
1
2
Points &
Boundaries
Chart
Plotter
1
Default Point Symbol
(
see figure below
)
Default Point Color
(
Red, Blue, Green, Yellow, Magenta, Orange, Cyan, Black
)
Point Size
(
50 to 200; 100
)
Icons Set
(
Modern, Classic
)
Point Density
(
Low, Medium, Full
)
Display Point Names
(
OFF, ON
)
Show Scale Slider
(
OFF, ON
)
Tide/Current Icons Size
(
50 to 150; 100
)
NavData Transparency (0 to 80; 10
)
PhotoFusion Transparency
(
0 to 80; 15
)
Tidal Currents Transparency
(
0 to 80; 25
)
Radar Transparency
(
0 to 80; 20
)
Continued on following page
Tide Range for PhotoFusion
(
0 m to 20 m; 0
)
Automatic Naming
(
OFF, ON
)
Automatic Naming Prefix
(
Input from software keyboard; default: WP
)
Data to Be Recorded in Event Comment
(
None, Date, SST, Date and SST
)
Record Event Mark 1 Automatically
(
OFF, ON
)
Range Link
(
OFF, ON
)
Echo Color
(
Multicolor, Green, Yellow
)
Default Event Mark x* Symbol
(
see figure below
)
Default Boundary Color
(
Red, Blue, Green, Yellow
, Magenta, Orange, Cyan, Black
)
Default Boundary Transparency
(
0 to 100; 40
)
Delete All User Objects
Restore Default Settings
Grid Interval
(
Off, Very Small, Small, Medium, Large, Very Large
)
Default Boundary Contour
(
, , , ; default:
)
Default Event Mark x* Color
(
Red, Blue, Green, Yellow, Magenta, Orange, Cyan,
Black; see figure below for defaults
)
Default Point
Symbol
Event Mark 3,
Green
Event Mark 2, Blue
Event Mark 4,
Yellow
Event Mark 6,
Orange
Event Mark 1, Red
Event Mark 5,
Pink
Show Fish It on Pop-up Menu
(
OFF, ON
)
* Event Mark 1~6