2. CHART PLOTTER
2-20
3. Tap [Fixed Color Setup] then tap a color. Go to step 10.
4. Select a color. Go to step 10
5. Tap [Variable Color] then tap an option.
6. Select one of the following, then tap [<] on the title bar to go back one screen.
[Depth]: Change the color of the track with depth.
[SST Range]: Change the color of the track with change in sea surface tempera-
ture.
[SST Variation]: Change the color of the track according to variation in sea sur-
face temperature. The following is an example.
[Speed]: Change the color of the track with speed.
[Bottom Discrimination]: Change the color of the track with bottom sediment.
[Depth Variation]: Change the color of the track with depth variation. The depth
at the start of track recording becomes the reference depth.
[Day of the Week]: The track color changes on the specified day of the week.
[Trip]: The color of the track changes in the order of red, blue, green, yellow, pur-
ple, orange, cyan. Go to step 10.
Note: In a single voyage (from power on to power off) the track is displayed in a
single color. However, if the track recording is started within 4 hours from the end
of the previous track recording, the track color will not be changed.
Temp. range (°F) Color Temp. range (°F) Color
16.60 to 16.80 Red 17.61 to 17.80 Orange
16.81 to 17.00 Yellow 17.81 to 18.00 Blue
17.01 to 17.20 Green 18.01 to 18.20 Red
17.21 to 17.40 Light-blue 18.21 to 18.40 Yellow
17.41 to 17.60 Purple 18.41 to 18.60 Green
To Next Page
Loading...
