FUTABA 6k - Page 78

78
Common function
In the initial state, the EXT-voltage maximum and minimum values are displayed at the transmitter.
(Value until reset)
① Select "EXT-VOLT" from the
telemetry screen with the Jog key.
② Open the setting screen by
pressing the Jog key.
① In the EXT-VOLT screen state, select
(MIN/MAX) from the menu with the
Jog key.
② Date reset by pressing the
Jog key for 1 second.
● A confirmation "beep"
sounds is complete.
Calling the setting screen
MIN/MAX reset
● EXT-Voltage MIN/MAX
EXT-Voltage MIN
Display
① Call the menu screen from the
home screen by pressing the + key
for 1 second.
＋
② Select
from the menu with the Jog
key.
③ Open the setting screen by
pressing the Jog key.
（1 second）
Calling the setting screen
"TELEMETRY"
EXT-Voltage display
EXT-Voltage MAX
EXT-Voltage display