Additional Info
143 G-TECH / Pro Competition User Guide, Release 3.1 143
X-Y-Z Gs Screen
If you suspect the G-tech is not measuring acceleration accu-
rately, one useful thing to do is to view the “X-Y-Z Gs
screen”. This display shows you the current accelerometer
readings measured by your G-tech.
1
Start in Configuration Mode.
2
Select “Calibration” and press .
3
Select “Accelerometers” and press .
4
Select “X-Y-Z Gs Screen” and press .
5
The X-Y-Z Gs screen will appear:
Note: DO NOT CALIBRATE ACCELEROMETERS or ERASE ACCELEROMETER CALIBERATION
on G-tech units which were shipped after August 2003. They have already been calibrated in the
factory. Older G-techs will automatically request calibration. If you are unsure contact tech support.
To Next Page
Loading...