Stored Runs
97 G-TECH / Pro Competition User Guide, Release 3.1 97
Downloading A Stored Run
Once you have recalled a stored run from the G-tech
(page 66), you can transfer it from the G-tech to a computer.
Note:
Transferring a run to the computer does not delete it
from the G-tech.
Note: Before transferring a run to the computer, you should
connect the serial cable between the G-tech and the computer.
Refer to “G-tech-Computer Connection” on page 157 for more
information on connecting the G-tech to a computer. You should
also ensure that the G-tech Performance Analysis System Soft-
ware (PASS) is ready to receive data from the G-tech. Further
instructions are provided with the PC software.
Use the following procedure to send the current run to a
computer:
1
Select “Download to PC” and press .
2
You will see a screen such as this. The computer
and the G-tech will “see” each other and begin
communicating back and forth.
You can press at any time to abort the process,
even if the G-tech has not begun the transfer.
To Next Page
Loading...