80 G-TECH / Pro Competition User Guide, Release 3.1
Measuring 0-40 MPH, etc.
Suppose you want to measure the time it takes you to reach
a certain speed (say, 40 MPH) from a standstill. This section
will show you how to do it.
Note: In this example, we measure 0-40 MPH time, but
you can use the same procedure to measure the time it takes to
reach any speed you wish.
1
Perform an acceleration run, making sure you hit
the speeds you want to measure.
In this example, we are measuring 0-40 MPH, so
we made sure the driver reached 40 MPH during
the acceleration run.
To Next Page
Loading...