GE 745 TRANSFORMER MANAGEMENT RELAY User Manual

GE Power Management 745 Transformer Management Relay 9-9
9 745 PC SOFTWARE 9.3 USING 745PC
9
9.3.3 LOADING SETPOINTS FROM A FILE
Loading the 745 with setpoints from a file is accomplished as follows:
1. Select the
File > Open
menu item.
2. 745PC launches the Open dialog box listing all filenames in the 745 default directory with the extension
745
. Select the setpoint file to download and click OK to continue.
Figure 9–11: OPEN SETPOINTS FILE DIALOG BOX
3. Select the
File > Send Info to Relay
menu item. 745PC will prompt to confirm or cancel the setpoint file
load. Click
Yes
to download the setpoints to the 745 relay or
No
to cancel.
9.3.4 ENTERING SETPOINTS
The following example illustrates the entering of setpoints from the 745PC program.
1. Select the
Setpoint > System Setup
menu item
2. Click the
Transformer
button in the
System Setup
window.
3. The following dialog box prompts for the transformer setpoint information. Note that the number of selec-
tions shown is dependent on the 745 installed options.
Figure 9–12: TRANSFORMER SETPOINTS DIALOG BOX

GE 745 TRANSFORMER MANAGEMENT RELAY Specifications

General

Brand	GE
Model	745 TRANSFORMER MANAGEMENT RELAY
Category	Relays
Language	English