GE AMX 4+ Technical Manual

 
         
   
4-23
   
1. Remove vertical column assembly. Refer to Section 4-1.
2. Remove follower cable. Refer to Section 4Ć3Ć5.
3. Remove lower brake and bearings. Refer to Sections 4Ć7 and 4Ć8.
4. Remove hex head bolt and flat washers securing column base assembly to vertical
column. See Illustration 4-13.
ILLUSTRATION 4-13
 
5. Pull column base assembly and spacers from vertical column.

GE AMX 4+ Specifications

General

Type	Mobile X-ray System
Maximum kVp	125 kVp
Collimator	Manual Collimator
Battery	Rechargeable, lead-acid
Image Receptor Compatibility	CR and DR systems
Focal Spot Size	1.2 mm
mAs Range	0.04 - 320 mAs
X-ray Tube	Rotating Anode