GE NetworX V3 User Manual

NetworX Version 3 Installation Manual
21
When in the menu:
Press to scroll to the start of the LCD message.
Disarm
When in master mode:
Press to disarm the system.
Note: The Disarm key works in the master mode only, after the user code and the
partition number have been entered.
When in the menu:
Press to scroll to the end of the LCD message.
Bypass
Press to select a zone to bypass.
The Enter Zone No. prompt displays. Type the zone number and press OK. Repeat this
action for subsequent zones you want to bypass. To remove a zone from the
bypassed zone set, enter its number again. To partially arm the system with the
selected zones bypassed, enter the user code. Disarming the system clears the
bypassed zone set.
Night Mode
Press to arm the system in Night mode.
Note: For this mode to work correctly, entry guard zones must be set. Also, see notes
below.
Chime
Press to toggle the Chime mode on and off. A chime is often used as an indication on
a shop door. There is a beep on chime activation and no beep on deactivation. For
more information, see the Chime menu option description.
No
Press No to:
•Cancel a change to the menu selection or
•Navigate to a higher level in the menu structure or
•Cancel a sequence when entering numeric data.
Note: Press NO key to clear any incorrectly entered user code or other information.
OK
Press OK to:
•Activate the menu or
•Accept selection changes or
•Move forward in the menu structure or
•Complete a sequence when entering numeric data.
Hash
When editing text and phone numbers:
•Press # F4 to move to the first character or digit.
•Press # F5 to move to the last character or digit.
•Press #¾ to delete a part of the string starting from the current cursor position to
the last character or digit.
•This button also allows to enter other special characters (see
Changing phone
numbers and phone prefixes on page
42).
Navigation
keys
Press the navigation keys to scroll through menu lists and options.
When in master mode or not in a menu:
•Press ½ to display bypassed zones.
•Press ¾ to display problem zones.
When editing text and telephone numbers:
•Press ½ to overwrite or insert text.
•Press ¾ to delete text.
Notes: F1, F2, F7, and F8 function keys can be programmed by the installer. F7 function key is programmed to Night
Mode by default. Function keys behave differently, depending on the settings configured by the installer, for
example, see descriptions for the Quick Arm, Instant Stay Toggle and Master Keypad menu options.
NO
OK
#
*

GE NetworX V3 Specifications

General

Brand	GE
Model	NetworX V3
Category	Security System
Language	English