NetworX Version 3 Installation Manual 
 
79 
Location  Term  Definition 
the selected phone number.  
2.4.1.1.1.6.1.1 Alarms  A menu option that sends a report to the selected phone 
number when an alarm occurs.  
2.4.1.1.1.6.1.2 Alarm Restores  A menu option that sends a report to the selected phone 
number when the alarm has been restored after an alarm.  
2.4.1.1.1.6.1.3 Opening/Closing  A menu option that sends a report to the selected phone 
number stating when the system is opened (disarmed) and 
closed (armed).   
2.4.1.1.1.6.1.4  Zone Bypass and Restores  A menu option that sends a report to the selected phone 
number when a zone is bypassed. A report is also sent 
when the zone is restored (un-bypassed).  
2.4.1.1.1.6.2 Tamper/Fault  A menu entry that groups together the tamper and fault 
events that are reported to the selected phone number. 
2.4.1.1.1.6.2.1 Tampers  A menu option that sends a report to the selected phone 
number when a tamper occurs. 
2.4.1.1.1.6.2.2 Tamper Restores  A report is sent when the previous tamper is no longer 
active.  
2.4.1.1.1.6.2.3  Zone Trouble and Restores  A menu option that sends a report to the selected phone 
number when a zone fault condition occurs. A report is also 
sent when the fault condition is no longer active.  
2.4.1.1.1.6.2.4  Expander Trouble and Restores  A menu option that sends an expander fault and restore 
report to the selected phone number. 
2.4.1.1.1.6.2.5  Siren/Line Cut and Restores  A menu option that sends a report to the selected phone 
number when a siren or phone line fault occurs. A restore 
report is sent when the fault is fixed.  
2.4.1.1.1.6.2.6  RF Sensor Lost and Restores  A menu option that sends a report to the selected phone 
number when an RF sensor is missing.  A restore report is 
sent to the central station when the receiver receives a 
valid signal from the lost transmitter.  
2.4.1.1.1.6.2.7  RF Low Battery and Restores  A menu option that sends a report to the selected phone 
number when a low battery condition occurs in an RF 
sensor. A restore report is also sent when the low battery 
condition is no longer active. 
2.4.1.1.1.6.3 Power  A menu entry that groups the power events that are 
reported to the selected phone number. 
2.4.1.1.1.6.3.1  Power Trouble and Restores  A menu option menu option that reports mains failure, 
mains restore, low battery and low battery restore events 
to the selected phone number.  
2.4.1.1.1.6.3.2  Aux Short Circuit and Restores  A menu option that sends a report to the selected phone 
number when short circuit is detected. A restore report is 
also sent when the short circuit condition is fixed.