NetworX Version 3 Installation Manual
84
Location Term Definition
2.4.4.2.6 First to Open/Last to Close A menu option that sends a report to the central station
stating when the system opened and closed. This option
can only be used in a multi-partitioned system.
A report is sent stating the first partition opened. A log is
then kept recording when the other partitions opened and
when they closed. This information is sent in a second
report when the last open partition closes.
2.4.4.3 Report Codes A menu option that groups codes that are sent to the
central station when a particular event occurs.
2.4.4.3.1 Zone Types A menu entry that groups all reporting codes for the
selected zone type.
2.4.4.3.1.1.1 Event Code A menu option that sets the event code reported for the
selected zone type.
2.4.4.3.1.1.2 SIA Code A menu option that sets the SIA code reported for the
selected zone type.
2.4.4.3.1.1.3
CID Code A menu option that specifies the Contact ID code to be
used when reporting the selected zone type.
2.4.4.3.2 Partition Reports A menu entry that groups all reporting for particular
partitions.
2.4.4.3.2.1.1 Restore A menu option that groups the report codes sent to the
central station when the system is restored.
2.4.4.3.2.1.2 Bypass A menu option that groups the report codes sent to the
central station when the partition is bypassed.
2.4.4.3.2.1.3 Tamper A menu option that groups the report codes sent to the
central station when a tamper event occurs.
2.4.4.3.2.1.4 Trouble A menu entry that groups the report codes sent to the
central station when a trouble event occurs.
2.4.4.3.2.1.5 Sensor Low Battery A menu entry that groups the report codes sent to the
central station if a low battery condition is reported for a
sensor in the particular partition.
2.4.4.3.2.1.6 Sensor Lost A menu entry that groups the report codes sent to the
central station when a sensor lost event occurs in the
particular partition.
2.4.4.3.2.1.7 Opening A menu entry that groups the codes reported on an
opening (disarm) event for the particular partition.
2.4.4.3.2.1.8 Closing A menu entry that groups the report codes sent to the
central station when the particular partition is being closed
(armed).
2.4.4.3.3 Keypad A menu entry that groups the report codes sent to the
central station for keypad related events.
2.4.4.3.3.1 Duress Code A menu entry that groups the report codes sent for a
duress event.
A duress situation is one in which a user is being
To Next Page
Loading...
