GE H
EALTHCARE
D
IRECTION
GA091568, R
EVISION
5 VIVID E9 S
ERVICE
M
ANUAL
8 - 28 Section 8-4 - Reloading the software
8-4-10-5 Press A. Install System Software. (Erase all partititions) (cont’d)
NOTE: The next screen (Figure 8-26) will only be displayed if this is the first time the software is
installed. i.e. after a HDD replacement. If the computer name has been generated previously,
the pop-up screen in Figure 8-27 will be displayed.
6.) Enter the VIVID E9’s Serial Number. The Serial Number is located on a label at the rear of the
VIVID E9.
NOTE: You don’t need to include the leading zeroes in the Serial Number. They will be automatically
added.
Example: “4404” (Zeros will be added, so the result will be “004404”
The Serial Number is used when the Computer Name is generated.
Figure 8-25 Prepearing to load the Application software
Figure 8-26 Enter Serial Number
To Next Page
Loading...
