GE Vivid E9

GE H EALTHCARE
D IRECTION GA091568, R EVISION 5 VIVID E9 S ERVICE M ANUAL
- Index - 7
not connected (InSite) 5-8
NTSC
video format selection 3-33
NTSC video format selection 3-33
O
Octave imaging 5-15
off-board peripherals 3-36, 3-37
omissions and errors -x
on site configuration 3-38
on-board peripherals 3-36
on-boardperipherals 5-96
operating modes 5-15
Operator Panel 5-21
block diagram 5-22
operator panel
audio is missing 7-7
cable kit replacement 8-141
no audio 7-7
no video on LCD display 7-7
upper installation 8-101
wrong key activated on the touch panel 7-7
optional peripherals
peripherals connection 3-36
Options 9-93
options
holder, left or right support replacement 8-121
setup 3-49
software options setup 3-38
options checks 10-8
OSHA lockout/tagout requirements (USA) 1-33
outlet test
wiring arrangement (USA and Canada) 10-24
overview
this manual 1-2
P
packing materials
recycling information 3-16, 3-17
PAL
video format selection 3-33
PAL video format selection 3-33
palm rest assembly replacement 8-166
patient data loss 7-7
Patient I/O
Physio 5-88
patient I/O assembly
replacement 8-295
pedal
dir lock replacement 8-217
mechanism replacement 8-214
release replacement 8-217
pedals 4-17
periodic maintenance inspections 10-1
peripheral checks 10-8
peripherals
cables 9-89
checks 4-47
connection 3-36
descriptions 5-96
external
peripherals 3-36
external peripherals 3-37
internal 5-96
internal peripherals 3-36
replacement 8-303
spare parts 9-66
phased and linear array probes 5-30
phone numbers for customer assistance 1-35
physical
inspection 10-9
physical dimensions 3-20
physical inspection 3-19
Physio
Patient I/O 5-88
Physio TX parts 9-92
place bookmark in logs 7-4
plate connectors w/guide replacement 8-49
power
connect AC power 4-5
power loss 5-87
power on/boot up 4-4
switch on the unit 4-6
power distribution 5-77
Power Doppler 5-16
power down 4-8, 4-9
power down sequence 5-86
power shut down 4-8
power stability requirements 2-6
power transients 2-6
voltage dop-out
2-6
power transients 2-6
power up
sequence 5-82
voltage setting verification 3-21
preliminary checks 10-6
preparations
requirements
DICOM 2-12
prepare the unit to be moved 4-17
prepearing for setup 3-19
prerequesite
provided by customer 8-9
printer
checks 4-47
external