GE DRAFT VOLUSON™ P8/VOLUSON™P6
DIRECTION 5775469, R
EVISION 3 DRAFT (JULY 19, 2018) BASIC SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-155
11.)Assemble Printer assembly.
12.)Push the printer assembly till it makes contact with sheet metal chassis.
Figure 8-219 Assembling printer
13.)Carefully insert the printer base plate in to the chassis slot.
14.)Assemble the printer base plate with chassis using 2 screws (2159634-screw BH M4X10).
15.)Assemble FRONT CABINET BEZEL ASSY BT16.
Figure 8-220 Assembling printer base plate
Printer Assembly
Push the printer assembly
Printer base plate
Assemble printer base plate
with two screws
FRONT CABINET
BEZEL ASSY BT16
To Next Page
Loading...
