Fetal Age These are normal ranges for estimating an unknown gestational age
from the sonographically measured variable.
Fetal Growth These are normal ranges for sonographically determined variables as a
function of gestational age. Therefore, the Last Menstruation Period
(LMP) must be entered first, otherwise the Growth Curve [Graph] won’t
be shown in the worklist.
1. New Table: (e.g., Fetal Age)
- In the displayed screen, select resp. enter:
Table Template: Select the desired template for the measurement table
Author’s Name: Enter author’s name.
Note: Author’s Name must be unique if measure Name exists!
Deviation Type: Select the deviation type
SD/GP Range: Choose the desired range for the selected “Deviation Type”
In/Output Unit: Choose the unit for the selected “SD/GP Range” from the drop-down
menus
Precision: Select the precision (# after comma)
Meas. Value: Select either “Edit manual” or “predefined” If “predefined” is selected,
enter the value for Min, Max and Interval.
- Click on this button, to edit the (predefined) Table values.
Measurements and Patient Worksheets (Reports)
11-114
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
To Next Page
