○○○○○○○○○○○○○○○○○○○○○○
3•26 Reference Guide
5. If necessary, select the source Block containing
the desired file and press ENTER to gain access.
6. Select the File to Copy from the source directory.
7. Pass into the destination directory to select the
destination
If necessary, select a Block in the Hard disk
and press ENTER to access then select a
destination.
8. Press ENTER twice to copy the file to the destina-
tion.
○○○○○○○○○○○○○○○○○○○○
©
Note: It is not possible to copy a file to itself.
Attempting to do so prompts the following
○○○○○○○○○○○○○○○○○○○○
message
:
Press ENTER or ESCAPE to close the win-
dow and repeat the operation by copying to
a different destination.
5
6/7
8
ENTER
TE
To Next Page
Loading...
