○○○○○○○○○○○○○○○○○○○○○○
16•48 Reference Guide
Cancelling assignments
DEASSIGN (F5)
The Deassign command cancels the assigned
key range of the selected sample.
1. Select the Sample to deassign.
2. Press the soft button F5 to deassign the sample.
After deassigning, the sample will play across
the entire keyboard range only if it is selected.
If you wish to save the deassigned sample
as part of the final Waveform, you must reas-
sign a key range before proceeding.
Sample Editing
EDIT (F6)
The Edit option opens a display showing non-
programmable information relating to the origi-
nal sample, and gives access to some program-
mable parameters which allow you to change
some characteristics of each individual sample.
The first four items of the display correspond to
the sample information:
Sample name
Shows the original name of the wave sample.
Sample Type
Identifies the sample format.
Properties
Shows the technical characteristics of the sam-
ple.
Sample size
Shows the size of the sample expressed as the
total number of samples.
The remaining items of the display correspond
to settings for the sample assigned to the cur-
rently selected key range. All these parameters
are programmable.
To Next Page
Loading...
Need help?
General
