GEM WK6 User Manual

○○○○○○○○○○○○○○○○○○○○○○
Edit Effect 10•3
EFFECTS PROGRAMMING (F4)
Editor of the currently selected effect. The pa-
rameter values and parameter configurations vary
according to the «Effect type» selected.
The tables at the end of this chapter list the Ef-
fect types and relative values of the parameters.
Rev.Time (Reverb Time)
Decay time of the reverb.
Delay (reverbs)
Initial delay between the emission of the original
sound (dry signal) and the reverb (wet signal).
H.F.Decay (High Frequency Decay)
Decay of the high frequencies. The parameter
indicates the final frequency of the filter. The de-
cay of the high frequencies has a longer duration
than that of the low frequencies.
Room Size
Dimensions of the simulated room. The time
lapse between the first reflection and the remain-
der of the reverb.
Diffusion
Duration of the reverb (Early type reverbs).
L.P.Filter (Low Pass Filter)
Determines the cutoff frequency of the filter.
Delay (delays)
Velocity of the delay repetition.
Feedback (delays)
Interaction of the delay with itself. Determines
the number of repetitions of the delay.
Feedback (phasers and flangers)
Interaction of the phaser or flanger with itself.
Determines the harmonic amount of the effect.
Freq.Modul. (Frequency Modulation)
Modulation velocity of chorus and flanger effects.
Depth
Depth of the action of the effect.
Feedback (Distortion)
Saturation of the distortion.
Speed (rotary effects)
Time required to pass from slow to fast or vice
versa.
Rotary
Slow/fast velocity.
DSP1 Parameters
(GrpA-Eff1)
DSP4 Parameters
(GrpB-Eff2)
DSP2 Parameters
(GrpA-Eff2)
DSP3 Parameters
(GrpB-Eff1)
Edit Effects - Effect programming
(Edit of the Effect assigned to the Performance)

GEM WK6 Specifications

General

Brand	GEM
Model	WK6
Category	Electronic Keyboard
Language	English