○○○○○○○○○○○○○○○○○○○○○○
Edit Sound 16•33
Pan
Valid for all Algorithms. In Dual situations, re-
gardless of whether the Filters are connected in
series or in parallel, there is only one pan enve-
lope for both oscillators.
The position of the sound in the “stereo pano-
rama” can be controlled dynamically by means
of the Pan envelope divided in two parts: the “Pan
Key On Envelope” and the “Pan Key Off Enve-
lope.
Pan Envelope Control
Envelope Activates the Pan Envelope and
amount determines its depth of action.
Assignable values: 0 … 7.
0 = no envelope.
Env amount Links the envelope amount to key
dyn sensitivity velocity variations.
Positive values increase the enve-
lope amount by increasing the key
velocity while negative values act
inversely with increased key veloc-
ity.
Assignable values: –7 ... +7.
0 = no response.
Env. amount Links the envelope amount to
touch sens. variations in the Aftertouch pressure.
Positive values increase the enve-
lope amount by increasing the
Aftertouch pressure, while negative
values act inversely with increased
Aftertouch.
Assignable values: –7 ... +7.
0 = no response.
Pan dynamic Links the sensitivity of the Pan
sensitivity envelope to key velocity variations.
Positive values move the sound fur-
ther right by increasing the key ve-
locity while negative values act in-
versely with increased key velocity.
Assignable values: –7 ... +7.
0 = no response.
Pan touch Links the sensitivity of the Pan
sensitivity envelope to variations in the
Aftertouch pressure.
Positive values move the sound fur-
ther right by increasing the Aftertouch
pressure, while negative values act
inversely with increased Aftertouch.
Assignable values: –7 ... +7.
0 = no response.
Edit Sound - main menu, Pan editor selected Edit Sound - Pan Envelope Control parameters
To Next Page
Loading...
Need help?
General
