○○○○○○○○○○○○○○○○○○○○○○
9•12 Reference Guide
Velocity
Modifies the key Velocity value. This parameter
represents the key-strike velocity, or its intensity.
Generally, the greater the velocity the higher the
volume. Velocity also affects the filter of many
sounds, making them brighter with increased ve-
locity.
©
Set the parameters and press ENTER to con-
firm the dynamic changes.
PARAMETERS
Variation
Selects one of the 4 Variations. Only existing
Variations can be selected (those with at least
one recorded Riff).
Riff
Selects one of the riffs from the chosen Varia-
tion. Only existing riffs can be selected. If the
Style is empty, the phrase «No Riff» appears.
Velocity mode
Provides two velocity modes to choose from
which affect the way the “Change Velocity” func-
tion operates.
Normal - The value indicated in «Velocity
change» is added to or subtracted from the
Velocity values of the notes.
Fixed - The note Velocities are all set to the
value specified in «Velocity change»
Change Velocity
Specifies the amount by which the velocity val-
ues can be changed. This depends on the op-
tion selected in «Velocity Mode».
Note range from... to...
Sets the upper and lower limits of the notes to be
affected. To modify the velocity of a single per-
cussive instrument of the Drum track, assign the
same note to the highest and lowest limit. For
example, to change the snare (D2) set the pa-
rameter to «Note range from D2 to D2».
Assignable values: C-1 ... G9.
From locator... To locator...
Determines the start and end point of the part to
be affected. It is possible to specify measure,
beat and resolution.
Assignable values: within the actual limits of the
Riff.
To Next Page
Loading...
Need help?
General
