○○○○○○○○○○○○○○○○○○○○○○
Edit General 17•5
Mode (F8) Computer options
Options to communicate with a computer
Off - Connection deactivated.
Macintosh - To connect to an Apple Macintosh™
computer. A standard Mac serial cable is required
to connect to the Modem port. In the computer
software, set a communication velocity of 1 MHz.
PC1 - Allows serial connection with an IBM™
computer or compatible, with a communication
velocity of 31250 baud. A standard PC serial
cable must be connected to the RS-232 port of
the computer.
PC2 - As above, but with a communication ve-
locity of 38400 baud.
Edit General; Date & Time
Date & Time
Sets the internal calendar and clock.
SET DATE (F1)
Sets the date in edit. Take the cursor to the day,
month and year and specify the value of each
parameter with the DIAL.
Confirm with ENTER or F1.
SET TIME (F2)
Sets the time in edit. Take the cursor to the hour,
minute and seconds with the cursor buttons and
specify the value of each parameter with the
DIAL.
Confirm with ENTER or F2.
To Next Page
Loading...
Need help?
General
