○○○○○○○○○○○○○○○○○○○○○○
Edit Style 9•13
Transposition in semitone steps.
Variation
Selects one of the 4 Variations. Only existing
Variations can be selected (those with at least
one recorded Riff).
Riff
Selects one of the riffs from the chosen Varia-
tion. Only existing riffs can be selected. If the
Style is empty, the phrase «No Riff» appears.
Transpose
Determines the value of the transposition (in semi-
tone steps).
Assignable values: -64 ... +64.
Note range from... to...
Sets the upper and lower limits of the notes to be
affected. To transpose a single percussive in-
strument of the Drum track, assign the same note
to the highest and lowest limit. For example, to
change the snare (D2) set the parameter to «Note
range from D2 to D2».
Assignable values: C-1 ... G9
From locator... To locator...
Defines the start and end point of the part to be
affected. It is possible to specify the measure,
beat and resolution.
Assignable values: within the actual limits of the
Riff.
Transpose
To Next Page
Loading...
Need help?
General
