○○○○○○○○○○○○○○○○○○○○○○
9•10 Reference Guide
Inserts a specified number of measures. The part
of the Riff that follows the insertion point shifts
forward the same number of measures as those
inserted. The length of the Riff changes.
©
Set the parameters and press ENTER to con-
firm the insertion.
PARAMETERS
Variation
Selects one of the 4 Variations. Only existing
Variations can be selected (those with at least
one recorded Riff).
Riff
Selects one of the riffs from the selected Varia-
tion. Only existing riffs can be selected. If the
Style is empty, the phrase «No Riff» appears.
Measures to insert
Specifies the number of measures to insert.
Assignable values: depends on the length of the
riff (max 16 measures).
Insert from locator
Specifies the measure at which the new meas-
ures will be inserted.
Assignable values: from the first measure (bar)
of the Riff, to the first measure after the end meas-
ure of the Riff.
Insert Measures
Insert measures example. Two measures are inserted at
measure 3. Measure 3 and all successive measure are moved
forward.