○○○○○○○○○○○○○○○○○○○○○○
User Guide 2•31
SELECT A STYLE PERFORMANCE
When Single Touch Play is on, each SK760/880
Style is associated to 8 Style Performances which
you can assign at any time before or during play.
The Style Performances are permanent and can-
not be destroyed. They are, however, rewritable
(keyboard and accompaniment sounds). Their
default settings can be restored with the Restore
command.
A Style Performance be programmed to change
the keyboard sounds as well as the accompani-
ment sounds, but the accompaniment patterns
of the current Style remain unchanged.
Here’s how to assign a different Style Perform-
ance to the current Style.
1. Press SINGLE TCH. PLAY and press a Style button
in the STYLE GROUPS.
2. Select a Style from bank 1 or 2 of the Style Group
with the corresponding soft buttons.
The display returns to Style/RealTime mode
showing the recalled keyboard sounds for the
Style selected.
3. Press the STYLE P. button to gain access to the
Style Performances.
8 Style Performance names associated to the
current Style are displayed.
4. Select a Style Performance with the correspond-
ing paired soft buttons.
Buttons C/D for E.Guitar in this example.
If Single Touch Play is off (LED off), selecting
a Style Performance activates the button au-
tomatically (LED on).
The display returns to Style/RealTime mode
showing the keyboard sounds recalled by the
selected Style Performance.
Repeat steps 3 and 4 for other Style Perform-
ance selections. Use D.HOLD to lock the
selection display.