○○○○○○○○○○○○○○○○○○○○○○
9•14 Reference Guide
The Microscope allows you to modify every sin-
gle event recorded in the tracks. The Event List
shown at the center of the display shows all the
events recorded.
ACCESS TO THE EVENT EDIT
1. Select the track where you want to edit the
events in the Event List.
2. Use the
/
cursor buttons to scroll through
the events. The selected notes are played
automatically.
3. Select the parameter to be changed using
the
/
cursor buttons.
4. Use the DIAL to change the selected param-
eters.
PROGRAMMABLE EVENTS AND PARAM-
ETERS
The «Status» column shows the type of event.
One or more parameters can be changed for each
event. See the next page for a table of events
and their parameters.
SELECT RIFF... (F1)
Selects the riff to edit. Select the variation and
the riff in the dialog window
Microscope
resolution
Event List
event type
(Status)
Value 3
Value 2
Value 1
Gate
track in edit
measure
beat
SHOW... (F2)
Opens a dialog window where it is possible to
select the events that will be displayed in the
Event List.
Set the events to mask to «Off»
Set the parameters and press ENTER.
To Next Page
Loading...
Need help?
General
