○○○○○○○○○○○○○○○○○○○○○○
User Guide 2•3
2 • Play the SK760/880 keyboard sounds (Style/RealTime mode)
Every time you power up, SK760/880 sets to Style/RealTime mode with the GrandPiano Performance
selected. This Performance is factory-set to activate the Piano 1 sound across the full keyboard. This
sound is assigned to the Upper 1 keyboard section - all other keyboard sections (Upper 2, Lower 1,
Lower 2) are off (mute).
FULL KEYBOARD MODE
Play a single sound or two layered sounds across
the entire keyboard
1. After turning the instrument on, you can play a
single sound (Piano1) straight away.
The sound, which is assigned to the Upper 1
keyboard section, plays across the entire
keyboard range (Full keyboard).
2. Press the soft button(s) E/F TWICE to select and
activate the Upper 2 keyboard section.
Note that the soft buttons in this situation are
paired.
The track (Upper 2) activates for “play”
(shown by the small keyboard icon in the track
status column).
3. Play on the keyboard.
You will hear two sounds for each note
played. Both sounds are layered across the
entire keyboard.
< --------------------- Piano 1 (Upper 1) --------------------- >
To Next Page
Loading...
Need help?
General
