○○○○○○○○○○○○○○○○○○○○○○
5•8 Reference Guide
SELECTING SONG-PERFORMANCES
Panel selection
To select a Song Performance, SK760/880 must
be set to Song mode.
1. Press the SONG P. button with the F4 Soft
button to open the «Song-Performance» se-
lection window.
2. Select a Song-Performance with the corre-
sponding Soft button.
○○○○○○○○○○○○○○○○○○○○
©
Note: When you select a Song-Performance,
SK760/880
sends CC00 [value 64]-PC messages
in rapid succession on the Common Channel..
The BankSelect, ProgramChange, Volume and
Pan messages of the tracks are sent on the normal
○○○○○○○○○○○○○○○○○○○○
MIDI channels.
○○○○○○○○○○○○○○○○○○○○
©
Note: If PLAY or STOP are pressed, the Song-
Performance recorded in the Song is recalled (the
initial one or the most recent one). All temporary
modifications will, therefore, be cancelled
.
○○○○○○○○○○○○○○○○○○○○
©
Note: If a Song-Performance is selected in
record mode, the selection number specified is
○○○○○○○○○○○○○○○○○○○○
recorded in the Master Track.
SELECTION VIA MIDI
To select a Song-Performance via MIDI, the se-
lection message must be sent to SK760/880 on
the Common Channel. Send the Control Change
00 [Value 64] and a Program Change message
in rapid succession.
Message... selects...
CC00 [64] - PC [0...7] Song-Perfs 1...8
Song-Performance (select with
the corresponding Soft buttons
F8
F7
F6
F5
F4
F3
F2
F1
To Next Page
Loading...
Need help?
General
