GEM WK6 User Manual

○○○○○○○○○○○○○○○○○○○○○○
1•4 User Guide
ALPHANUMERIC ENTRY
In name writing situations (Performance name, Song name, etc.), the keyboard activates as a source of
alphanumerical data where each note of the central zone of the keyboard corresponds to a letter, sym-
bol or number. Use the / cursor buttons or the DIAL to navigate within the active name writing zone.
ALPHANUMERIC CONFIGURATION IN NAME-WRITING MODE
The following example shows how to modify a
Performance name:
1. Press the STORE PERFORMANCE button.
An entry zone appears showing the status of
the current Performance:
2. Press the Soft buttons F7 or F8 to activate
the “Change name...” function. A second
entry zone appears where a name can be
inserted. The current name appears selected
(shown in negative highlight).
3. To completely cancel the selected name, in-
sert the first character. To change one or
more characters only, move the flashing cur-
sor with the cursor buttons.
4. Insert the desired characters using the key-
board. Each note corresponds to a charac-
ter, processing command or number.
Two options appear below the name (“Caps
On/Caps Off” and “Insert/Overwrite”) which
can be enabled or disabled with notes D2 and
D#2 respectively.
The notes on the extreme left of the keyboard
zone provide word processing functions:
• D2: CAPS - Caps On / Caps Off;
• D#2: INS/OVER - toggles between
Insert / Overwrite mode;
• E2: SPACE - inserts a space
between two entries;
• F2: DELETE - cancels the selected
character or the one after;
• G2: <— (BACKSPACE) - cancels
the previous character;
5. Move back with the cursor button and cor-
rect wrong characters. In Overwrite mode,
the inserted characters substitute the se-
lected characters (in negative highlight).
6. Press ENTER to confirm and to close the
active zone, or press ESCAPE to cancel and
close the window.

GEM WK6 Specifications

General

Brand	GEM
Model	WK6
Category	Electronic Keyboard
Language	English