○○ ○○○○○○○○○○○○○○○○○○○○
A•26 Appendix
RECOGNIZED CONTROL CHANGE MES-
SAGES (MIDI CONTROLLERS)
A ControlChange message activates a Controlller,
determined by the first ControlChange value.
The ControlChange consists of three parts:
•
status byte
- (status) determines the status of
the ControlChange message.
•
data byte 1
- (value 1) MIDI Controller acti-
vated by the ControlChange message. This
is the number by which the ControlChanges
are identified in the following tables.
•
data byte 2
- (value 2) value of the activated
MIDI Controller.
CONTROL CHANGE ON TRACKS
CC00,32 Bank change.
CC01 Modulation.
CC06,38 Data Entry.
CC07 Main Volume.
CC10 Pan (panorama).
CC11 Expression.
CC12† Vocal Volume (Vocal Processor)
CC13† Vocal On/Off (Vocal Processor)
CC14† Mode Recal (Vocal Processor)
CC15† Voice Set recall (Vocal Processor)
CC16,48† Effects selection
CC17,49† Effects volume
CC18,50† General Purpose (Tuning control)
CC32 BankSelect LSB.
CC64 Damper pedal.
CC66 Sostenuto (sustain) pedal.
CC67 Soft pedal.
CC71 Resonance.
CC72 Release Time.
CC73 Attack Time.
CC74 Filter Cutoff Frequency.
CC80 One Shot control
CC81 On/Off control
CC85† Voice Mute mode (Vocal Processor)
CC91 Effect 1 send (E1, reverb depth).
CC93 Effect 2 send (E2, modulation depth).
CC98,99 NRPN
CC100-101 RPN
† = travels on MiIDI Common channel only
To Next Page
Loading...
Need help?
General
