○○○○○○○○○○○○○○○○○○○○○○
2•58 User Guide
7. Confirm the new Block name with ENTER.
The floppy disk directory now shows the first
8 empty Song locations (within the new
block). Up to 16 locations are available by
scrolling with the cursor arrow.
8. If necessary, select a destination and press EN-
TER twice to execute the Save Single Song com-
mand.
Pressing ENTER the first prompts a request
to confirm the command (Are you sure?).
Press ENTER a second time to complete the
procedure.
After a short period, the Song will be saved
to disk.
Remember that if you save to an existing file,
it will be overwritten by the incoming one.
Whenever possible, try to save to an empty
location (shown as a broken line) to safeguard
existing data on the storage device.
9. Press DISK (or ESCAPE three times) to exit DISK
mode.
7
ENTER
TEM
To Next Page
Loading...
