Remove the lower screw of the left-hand shock
absorber.
- Remove the engine-swinging arm fixing pin by
undoing the nut and operating on the head of the
pin as shown in the photograph.
- The engine is now free.
When refitting the engine to the scooter, carry out the operations in reverse order from that adopted
when removing it and respect the tightening torque shown in the Characteristics Chapter.
-Check the engine oil level and if necessary top it up with the recommended type.
- Fill and bleed the cooling circuit.
- Check the functioning of the accelerator and the electrical devices.
CAUTION
PAY PARTICULAR ATTENTION TO POSITIONING THE THROTTLE COMMAND TRANSMISSION
PROPERLY.
Fuoco 500 i.e. Engine from vehicle
ENG VE - 5
To Next Page
Loading...
