WARNING
THIS PANEL CONTAINS S (LIVE) VOLTAGE. ALWAYS DISCONNECT THE MAINS
SUPPLY FROM THE PANEL BEFORE REMOVING OR INSTALLING COMPONENTS.
ELECTRO-STATIC SENSITIVE DEVICES (ESD) TAKE SUITABLE ESD PRECAUTION
WHEN REMOVING OR INSTALLING PRINTED CIRCUIT BOARDS.
This panel is marked to show that it conforms to the requirements of the above European Community Directives:
Electromagnetic Compatibility Directive 89/336/EEC (and the amending Directive 92/31/EEC)
Low Voltage Directive 73/23/EEC
It is assumed that the user of this manual is a suitably-trained operator/maintainer
GFE - Global Fire Equipment S.A. manufacturer of addressable fire detection equipment,
declares, that the JUNO-NET fire control panel and repeater panels conform to the following
directives of the EEC commission:
Construction Products Directive 89/106/EEC amendment 93/68/EEC
73/23/EEC - Low Voltage directive and amendment 93/68/EEC
89/336/EEC - EMC Directive and amendments 92/31/EEC & 93/68/EEC
and comply with the following standards:
EN55022 class B, EN61000-4-22,3,4,5,6,8,11
EN61000-3-2,3 EN54 Pt 2 and Pt 4.
We, Global Fire Equipment Lda. hereby declare, for the effects of the requirements laid down with EN-54 Pt4 paragraph 6.1,
that the power supply equipment included in our analogue addressable fire alarm panel named JUNO-NET, has been
designed in accordance with a quality management system which incorporates a set of rules for the design of all elements
of the p.s.e., and that its components have been selected for the intended purpose , and expected to operate within their
specification when the environmental conditions outside the cabinet comply with class 3k5 of IEC 721-3-3 : 1978
We, Global Fire Equipment Lda. hereby declare, for the effects of the requirements laid down with EN-54 Pt2 paragraph
12.1, that the control and indicating equipment which is our analogue addressable fire alarm panel named JUNO-NET, has
been designed in accordance with a quality management system which incorporates a set of rules for the design of all
elements of the c.i.e. and its components have been selected for the intended purpose , and are expected to operate within
their specification when the environmental conditions outside its cabinet comply with class 3k5 of IEC 721-3-3 : 1978
João Paulo Galvão
GENERAL DIRECTOR
MARF, Armazens F3 & F4, Sítio do Guelhim- Estoi, 8009-021 Faro, PORTUGAL TEL: +351 289 896 560 www.globalfire.pt
CE DECLARATION OF CONFORMITY
CE DECLARATION OF CONFORMITY
104
Manufacturers of Fire Detection Equipment
INSTALLATION & COMMISSIONING MANUAL REVISION 4.0 05/2013
JUNO NET - NETWORKABLE ADRESSABLE PANEL
globalfire.pt
To Next Page
Loading...
